I currently have a vCenter server housed in a Windows 2012 server. I need to upgrade from 5.5 build 2001466 to 5.5 u3. All my host are 5.5 the last host added is a 5.5u3. I am planning to do an upgrade for next year to 6. I am wondering if it all the better to just jump to 6. I know I can manage my host as long as my vCenter is a higher version.
Thank you for your help,
Edsel
Is anyone here in the lighthouse program for VMware Cloud on AWS? Has anyone purchased a cluster for POC/POV purposes?
Just curious what your experiences have been.
i had a problem with our UCS server and had to replace memory. i put into maintenance mode and all vm's vmotioned to other blades. i swapped out memory. blade is running but now vm's wont vmotion back. ha and drs are enabled. i have 7 servers in this cluster.
do i need to "bounce" ha or drs to get it to resync?
Hi All
I am trying to hide certain tabs such as Storage when requesting a new VM
This is very similar to another forum post (https://communities.vmware.com/message/2724573#2724573)
Cheers, Luke
We have just upgraded our VM hosts to the Lenovo Server ST550 - RC-27-11-2017-COMPALLI-ST550 with 240GB Lenovo S3520 SATA 2.5" SSD for the VM base install.
When I run the # esxcli storage nmp device list command the SSD still not showing, however when I check in the BIOS the drive is there.
As a workaround I have installed the HOST onto an internal USB3 as the server’s support this.
How do I get this drive available to attach as storage? We are running VMware ESXi 5.5.x
Hello,
Just noticed after setting up the UEM configuration for RDS apps that Self-Support tool is not functioning. After resetting a configuration no flag file is set in the users share for the configuration and after completing a logoff/on the self-support indicates no file size associated for that configuration. However, when browsing to the users file share we can confirm that the configuration is still there and it has not been deleted. The user can browse to the configuration and delete the setting manually.
Please let me know what I should be looking for.
Thanks
Hi,
I cannot get my VM Windows 7 to connect to the hosts network. I have tried BRIDGED, it just wont connect. The goal of my project is to setup a VM, with Steam installed and stream games to another PC on the network.
But for Steam In-Home streaming to work, they have to be on the same network.
Any advice?
I am working with a Managed Services IT Provider, and we are trying to determine the most efficient method of applying patches and updates to VMWare ESXi servers, and VCenter servers and appliances. As of now, we manually apply updates to each server, but with hundreds and possibly thousands of servers at our various customers throughout the world, doing so in a timely manner is nearly impossible.
Does VMWare have a solution for managed service providers to allow this to happen in an efficient manner? What is the best way for us to go about this, for all of our customers, without taking up a tremendous amount of time, and also allowing for this to happen on a routine basis, so our customer's VMWare servers are regularly patched?
Hi,
We are trying to set defaults for the AWS instance Blueprint deployment. Is there any way to hide items such as the provision into , location and setting defaults. I understand we can create a XAAS blueprint and do a workflow that does a catalog request, but that seems like such a roundabout way to do something to help simplify the provisioning workflow and make it useable for business users.
Hi
My requirement is to associate blueprints with multiple tenants while installing the our plugin. One of the approach is to ask tenant admin credentials of each tenant and associate the blueprint. But this is not a good solution when you have lot of tenants.
Other solution is to configure vRA Host for each tenant. Then using system admin login associate blueprint with each tenant using vRA Host of each tenant. In this solution currently facing problem to access vRA host of each tenant, not able to get host ids. Please let me know if this solution is valid and how to acheive this.
If any other solution to this problem is available please let me know. I am new on vRA automation so please ask if you need more info. Thanks
I’m using VMware HTML Console SDK to send key press to the VM. From version 5.5 update 2 script doesn’t work anymore. The problem lies in the fact that from version 5.5 update 2 communication is switched to HTTPS protocol. Because we are using default VMware certificate which are self-signed script doesn’t work anymore. I found that is because Internet Explorer displaying certificate error warning page (when opening html file with wss URL).
My question, is there any way to jump this warning page and send key press to VM from Internet Explorer?
I found some solution like:
and
but this didn’t work.
Is this correct way to ignore warning page and proceed to VM. Also I don’t know where I should put this commands (.html or .js files).
If somebody have idea how to fix this problem, I would be grateful for help.
Hello,
I am a little confused over where the witness appliance should be located with regard to virtual centre.
My vSAN is a 2 node direct connected cluster with a witness in a different site.
Both the witness & the vSAN hosts are connected to the same Virtual Centre.
The vSAN hosts sit in their own datacentre & then a vSAN enabled cluster within that DataCentre.
The Witness sits in its own DataCentre (no cluster configured).
I have configured each of the hosts to send the witness traffic over the management network.
In the following post there is a video & it shows the witness in its own datacentre.
vSAN 2 Node with Direct Connect - Virtual Blocks
On the witness server I have the error 'Host with vSAN service enabled is not in the vCenter cluster'
The witness does not need to be in a vSAN enabled cluster (mine is in its own cluster (will have more witnesses soon)) that I am aware of.
Does this need to be in a vSAN enabled cluster?
Thanks,
Matt Riddler
Pulling my ever thinning hair out here.
I am unable to join my 6.5 vcsa to a 2012 AD. When I use the CLI, I get the following errors:
Error: LW_ERROR_KRB5_REALM_UNKNOWN [code 0x0000a39f].
Cannot find KDC for requested realm.
I have double checked DNS settings and I have correctly forward/reverse lookup zones. I have a time server that is synching across the domain. This is a closed lab so I am unable to upload logs.
Is there a newer version of the appliance available? Am I missing something here?
Hello,
Say I have implemented vRealize Suite as my provide cloud. To achieve high availability (for both vRealize components themselves and user VMs managed by vRealize ) across two metro data centers, can I implement vMSC in such an environment?
if yes, any guideline?
If not, how can I achieve high availability for environment managed by vRealize suite?
thanks a lot!
Mike
Is the most current documentation for the template customization at https://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc_50%2Fvim.vm.customization.Sysprep.html ?
When browsing the site for vpshere 6.5, I can only find the newer REST based docs for similar functionality.
I can access Vm console using webMks_sdk 2.1.0, according to this site : https://vittoriop77.blogspot.hk/2016/03/vsphere-6-html-console.html#.WMJpyiGGNNw
But I still have a question:
Before I running code to access vm console, I had to install certificate using mmc into the client Os in which I used browser to access VM Html5 console according to this site : http://helpdesk.ssls.com/hc/en-us/articles/204333681-How-to-import-intermediate-and-root-certificates-via-MMC.
But if I have hundreds of client which want to access vm html console, I have to install certificate into each client. It's lots of work!!
Is there any easy way ?
Hello,
I will start to certificame in vMWare with VCP. Today I passed the vsphere 6 fundation exam. Now I need to do both exams: VCP6-DCV and VCP7-DTM.
I understand that one time that I approve one VCP exam, In the second dont need a course, so my idea is does and approve the VCP6-DCV exam, after, I will do the course "Horizon 7: Install, Configure, Manage [V7]" and at the end, I will do and approve the VCP7-DTM.
In that order and with this, I can recive the two certifications witout any more to do?
Thak you for yours answers.
Regards.
Could anyone help me with this error?
I've been having issues with my Vcenter server ever since we've upgraded to 5.5 I cannot use windows authentication to access the server but recently, when logging into the server, I've been receiving an error stating "Inventory Services could not be loaded" and I show no inventory within Vcenter. After a few reboots it usually came back up. (I've needed to login as local admin to see anything, domain admin would not show inventory)
Now, however, a critical error is happening, and I can not login to Vcenter at all anymore. When attempting to login I get the following error...
Failed to connect to VMware Lookup Service - https://vCenter:7444/lookupservice/sdk
I believe this related to some type of SSL Certificate error, but I can not find any workaround to fix it. The computer name and IP address of the server has not changed and the time is accurate. I also cannot log into https://vcenter:5480 to access the admin page to reset the security certificate. (it just redirects me to the vsphere web login again)
I am a former Mac Leopard user that was running Fusion 3.1. I haven't used Fusion since 2014. I bought a new Mac back in 2016. It is running El Capitan, OS X 10.11. Does anyone know if my 3.1 VM will migrate to Fusion 10? My old 3.1 VM was running Win 7, which was an upgrade from Win XP. Is there a stair-step migration process, i.e., migrate to 7 or 8 then to 10?
Hi,
after the last update of OSX.
I start my Windows 10 virtual machine on Fusion 10, at the beginning it work correctly then, after a while, I get Unidentified Network error message in the windows network adapter.
The error persist to the a simple windows restart operation.
The only way to solve the problem is to completely quit of fusion program, at the next start the network works fine for a while.
I use wifi in my Mac machine and the network configuration on fusion is the default "Shared with my Mac".
before the update I used HighSierra 10.13.1 and everything worked fine.
any suggestion?
Thank you
Domenico