HI Guys,
Some of my VMNICs (3 out of 5) are showing disconnected while i checked in DCUI of the ESXi (IBM) box.
Raised a case with vendor and got the reply as " Actually your VMNICs are not down but their ports are blocked"
Could you help me with commands or steps to check that port information on the server and open the ports.
Thank you,
Sathish Vijay
9884106697
Any idea to solve this issue ?
Hello.
Was Run storage DRS Now.
Why "Before" and "After" same ?
And one big VM (Storage usage 4.13 TB) recomendation is move them to datastore with Free: 4.86 TB and Before and After same to.
The programs is called CaseWare Working Papers 2018. I have tried installing it directly on the image and as an app volume. When it's installed directly on the image, it will work fine as long as the logged in user doesn't have any app volumes assigned. The second an app volume is assigned and the program is launched, the attached error appears. Restarting the program does work, but people are going to be concerned seeing this message over and over. If the program is installed as an appvol, the program cannot fix itself.
I have spoken with the software's support and they tell me this error normally pops up after a Windows 10 update breaks some symbolic registry links. We however are using Windows 7, and it's not an update issue. The symptoms only manifest when the App Volumes Agent Services is running. I have tried to copy the reg keys it supposedly changes after pressing Yes on the error message, but that doesn't help.
I'm wondering if there is a way to capture the symbolic link changes and manually have UEM do them on log in, or if there is some way to not have Appvolumes effect this program. It's a key program to our business and has completely stalled our Horizon roll out.
I know it's a long shot but any help is greatly appreciated.
Hi Communities,
Running ESXi 6.5, I was digging on 2 CPU parameters for my VMs:
I understood that we have two level/generations of native virtualized instructions here:
But, what is not clear is why we are mixing CPU in CPU/MMU Virtulization? the choice of "Hardware CPU (& {soft, hard} memory)" is about to use VT-X right? So if I choose Hardware CPU in 2) and not checking "Hardware virtualization" in 1), it's confusing right?
Furthermore, I have an esxi running on a Xeon(R) Gold 6126 (yeah), that have VT-X/EPT... And I can not choose Hardware MMU and CPU on parameter 2), even if I checked 1) !
Please enlight me community!
Thanks & have a nice day!
Greg
Hey all,
As you probably know, when deploying VCF with Cloud Builder NSX-V deploys controllers and installs vRLI on the VLAN backed portgroup during bring up. My assumption is that the networking architecture under the covers that should be used is the VVD architecture to allow for multi-region futures. However, when deploying vRSLCM, VCF only asks for a VLAN and creates a VLAN backed portgroup during deployment and configuration. So a few questions hopefully you can help answer for me:
1. In the VVD architecture, vRSLCM is put on the cross region VXLAN so that it can perform a site failure. I've tried editing the portgroup post deployment but it fails during vRLI import.
2. I've deployed ESGs and UDLRs in the typical VVD fashion but am concerned about how the rest of the workflows will tie into the architecture (vROps and vRA).
3. In a multi-region scenario, are we saying that there will be a SDDC manager at both sites?
TIA!
Hello,
I am deploying an SQL cluster on top of VMware vSphere and we are finding and discussing all the options available for SCSI controller and disk Sharing.
I appreciate your advice about these topics specially for RDM disk Sharing and the difference between Multi-Writer, Unspecified and No sharing.
Hi,
I'm implementing an hybrid vSAN infrastructure and I have a question about the disk cache setting.
Hardware:
4x Lenovo x3650
2x disk groups per host with the folowing hard drive :
1x800GB SSD for caching tier
7x1,2TB HDD for the capacity tier
SAS Controller Lenovo N2215.
My question : Do I need to enabled or disabled this setting?
This is a setting in the controller bios for each hard drive : Disk Cache Setting (Enabled or Disabled)
I know we need to disabled the controller cache, since I do not have any cache on that controller, i'm ok. I'm just confuse about the Disk Cache Setting since I didn't found any information, except in the VmWare compatibility guide that said : Mandatory: Disk Cache
Thanks
David
Hello,
is there a way to call a workflow in a scriptable task like you can with actions?
We are on the slow march towards win10, and happened across an unexpected behavior today.
We had been using vmrc 4 as an IT support tool to remote onto people's machines for tech support calls. It was quick and invisible to the end-user.
We are moving our admin PCs over to win10 now, and vmrc 4 does not work (it launches in the background, but the GUI never comes up?), so we downloaded vmrc 10.6 and modified the code in our tool to make it connect. Problem is that the connection process is extremely disturbing to end-users. Their screen blinks down to 1 display, and moves all windows to that display, then blinks again to bring their 2nd display back, but does not move anything back to it.
Is there a way we can make the newer version of vmrc work the way the old one did where it is silent to the users? Or at the very least does not make them re-organize all of their windows every time they call the help desk?
The behavior happens if we launch vmrc 10.6 from either a win7 machine, or win10, so it appears to be a setting in the tool rather than the move to win10, but I do not see any sort of config options available which may affect this.
Hi, all.
The VM was deployed with a different IP than the network profile.
I have assigned the range 10.10.27.200 to 10.10.27.229
In vRA, deployed VM's IP address is 10.10.27.200
However, the IP that you see in the VM has a completely different IP allocation.
What am I supposed to fix?
Thanks for your advice !
When Editing a particular VM on ESXi 6.5 standalone it gets stuck on "loading".
See image in attachment.
Not sure even what I can try from here...
P.S. I have unregistered/registered again no luck
Hey!
I configured a fresh installed VMware vSphere cluster with 3 single node and when I should try to testing NFS share performance the VM hasn't started. I watched vmkernel logs in /var/log what happened with datastore and I saw this:
019-09-18T15:44:05.459Z cpu30:2098703)WARNING: NFS41: NFS41FSAPDNotify:6027: Lost connection to the server 10.1.2.57 mount point ssd, mounted as 56016377-f996d3c5-0000-0000000 00000 ("/volume1/test")
2019-09-18T15:44:05.459Z cpu30:2098703)StorageApdHandler: 1203: APD start for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:44:05.459Z cpu5:2097602)StorageApdHandler: 419: APD start event for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:44:05.459Z cpu5:2097602)StorageApdHandlerEv: 110: Device or filesystem with identifier [56016377-f996d3c5-0000-000000000000] has entered the All Paths Down state.
2019-09-18T15:44:15.989Z cpu35:2101468)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:44:18.475Z cpu4:2099935)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:44:25.037Z cpu30:2099328)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:44:28.879Z cpu38:2100473 opID=69e0f6e3)World: 11943: VC opID k0gphp04-74422-auto-1lfc-h5:70012138-75-77 maps to vmkernel opID 69e0f6e3
2019-09-18T15:44:28.879Z cpu38:2100473 opID=69e0f6e3)Unmap6: 7133: [Unmap] 'Datastore':device(0x430717722f70)does not support unmap
2019-09-18T15:44:30.991Z cpu35:2101468)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:44:33.478Z cpu4:2099935)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:44:34.901Z cpu10:2101481)J6: 2651: 'Datastore': Exiting async journal replay manager world
2019-09-18T15:44:36.706Z cpu33:2101417)WARNING: NFS41: NFS41FileIOSync:731: Synchronous IO on obj 0x430744eb39e0 (fh 0x430bd7e3a098) failed on #2 retry: IO was aborted
2019-09-18T15:44:36.706Z cpu14:2097550)WARNING: NFS41: NFS41FileIOSync:731: Synchronous IO on obj 0x430744e90040 (fh 0x430bd7e3fcc8) failed on #2 retry: IO was aborted
2019-09-18T15:44:36.706Z cpu7:2098714)WARNING: SunRPC: 3913: fail all pending calls for client 0x43072e3d7240 IP 10.1.2.57.8.1 (socket half closed)
2019-09-18T15:44:36.707Z cpu3:2098701)NFS41: NFS41ProcessExidResult:2301: clientid 533f825d10000000 roles 0x10000
2019-09-18T15:44:36.708Z cpu30:2098703)NFS41: NFS41ProcessClusterProbeResult:3875: Reclaiming state, cluster 0x430bd7e36e70 [0]
2019-09-18T15:44:36.708Z cpu20:2098707)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744eb39e0 open status: Failure; rqst 0x430bd7e40560 cmpd stat us: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu12:2098705)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744e92510 open status: Failure; rqst 0x430bd7e42340 cmpd stat us: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu20:2098707)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744e90040 open status: Failure; rqst 0x430bd7e461f0 cmpd stat us: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu6:2098708)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744ccd210 open status: Failure; rqst 0x430bd7e45090 cmpd statu s: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu3:2098706)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744e87c80 open status: Failure; rqst 0x430bd7e45940 cmpd statu s: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu20:2098707)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744e815d0 open status: Failure; rqst 0x430bd7e46aa0 cmpd stat us: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.708Z cpu12:2098705)WARNING: NFS41: NFS41OpenReclaimDoneWork:5345: Failed to reclaim objDesc 0x430744e91590 open status: Failure; rqst 0x430bd7e40330 cmpd stat us: NFS4ERR_NO_GRACE
2019-09-18T15:44:36.710Z cpu30:2098703)StorageApdHandler: 1315: APD exit for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:44:36.710Z cpu30:2098703)NFS41: NFS41FSAPDNotify:6093: Restored connection to the server 10.1.2.57 mount point ssd, mounted as 56016377-f996d3c5-0000-000000000000 ("/volume1/test")
2019-09-18T15:44:36.710Z cpu5:2097602)StorageApdHandler: 507: APD exit event for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:44:36.710Z cpu5:2097602)StorageApdHandlerEv: 117: Device or filesystem with identifier [56016377-f996d3c5-0000-000000000000] has exited the All Paths Down state.
2019-09-18T15:44:51.718Z cpu6:2099935)WARNING: NFS41: NFS41FileOpOpenDir:4331: Failed to process the open directory result: IO was aborted
2019-09-18T15:45:03.780Z cpu27:2101457 opID=4896837a)World: 11943: VC opID sps-Main-293449-809-4d-9d-e6c4 maps to vmkernel opID 4896837a
2019-09-18T15:45:03.780Z cpu27:2101457 opID=4896837a)Unmap6: 7133: [Unmap] 'Datastore':device(0x430717722f70)does not support unmap
2019-09-18T15:45:09.787Z cpu33:2101503)J6: 2651: 'Datastore': Exiting async journal replay manager world
2019-09-18T15:45:21.725Z cpu15:2098690)WARNING: NFS41: NFS41SessionSlotUnassign:4133: sess 0x430bd7e43e60 slot table usable slots (15) below 50%: abandoning
2019-09-18T15:45:21.725Z cpu30:2098703)WARNING: NFS41: NFS41FSAPDNotify:6027: Lost connection to the server 10.1.2.57 mount point ssd, mounted as 56016377-f996d3c5-0000-0000000 00000 ("/volume1/test")
2019-09-18T15:45:21.725Z cpu30:2098703)StorageApdHandler: 1203: APD start for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:45:21.725Z cpu5:2097602)StorageApdHandler: 419: APD start event for 0x430bd7e35d70 [56016377-f996d3c5-0000-000000000000]
2019-09-18T15:45:21.725Z cpu5:2097602)StorageApdHandlerEv: 110: Device or filesystem with identifier [56016377-f996d3c5-0000-000000000000] has entered the All Paths Down state.
2019-09-18T15:45:42.176Z cpu35:2101468)WARNING: NFS41: NFS41FileOpOpenDir:4331: Failed to process the open directory result: IO was aborted
2019-09-18T15:45:51.728Z cpu0:2099408)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:51.728Z cpu10:2099935)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:51.731Z cpu22:2099841 opID=d4a00b45)World: 11943: VC opID k0gphp04-74521-auto-1li6-h5:70012161-94-6d maps to vmkernel opID d4a00b45
2019-09-18T15:45:51.731Z cpu22:2099841 opID=d4a00b45)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:51.732Z cpu5:2099853 opID=18d4e77)World: 11943: VC opID k0gphp04-74400-auto-1les-h5:70012126-44-22 maps to vmkernel opID 18d4e77
2019-09-18T15:45:51.732Z cpu5:2099853 opID=18d4e77)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:51.732Z cpu24:2099328)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:53.421Z cpu2:2099410 opID=190efaad)World: 11943: VC opID k0gphp04-75176-auto-1m0b-h5:70012209-45-56-e6d8 maps to vmkernel opID 190efaad
2019-09-18T15:45:53.421Z cpu2:2099410 opID=190efaad)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
2019-09-18T15:45:57.178Z cpu35:2101468)WARNING: NFS41: NFS41FileOpGetFileAttributes:4239: Failed to get file attributes for object 0x430744eb2870: IO was aborted
Details:
NAS: Synology FS 2017
VMware: 6.7 update2 in hypervisors (NFS VAAI Plug-in has installed too) & fresh and latest vsphere
Network: 1 uplink based DSwitch
In NAS I set all permission what vmware need to see and communicate to the NFS server.
Have you got any idea for solving this problem ?
Thanks a lot!
Hello All,
Host: Windows 10 Pro
Guest: OpenSuSE
I am attempting to give my Linux Guest OS access to the SD Card slot on my laptop. I followed the instructions found at the link below, which shows how to add the SD Card slot as a 2nd Hard Disk. But, when I do this, the Guest does NOT boot. I just get a black screen as soon as I hit Play to start the Guest, and I never see the VMWare Bios screen or anything like that. Almost appears as if it's trying to boot to the second Hard Disk, which is currently an empty SD Card.
https://www.htpcguides.com/how-to-use-sd-card-reader-in-vmplayer-and-vmworkstation/
As soon as I shutdown the Guest, and remove the 2nd HDD the Guest boots up just fine. So I'm not sure what the issue is? I've tried adding it as IDE, SATA and SCSi devices, but the result is the same for all, Guest doesn't boot with 2nd HDD added to VM Settings.
One last thing I'm noticing, after I remove the 2nd HDD and boot up the Guest. If I look at Removable Devices, there is a device available called "Realtek USB3.0-CRW". If I select that device and click "Connect" to connect it to the Guest, I notice that the SDCard disappears from the Windows 10 Host's Disk Management. Almost as if it's disconnecting the SD Card from the Host and adding it to the Guest. But, running fdisk in the Guest doesn't show the SD Card.
Any help would be greatly appreciated!
Thanks in Advance,
Matt
Hello,
I'm trying to add a domain to my vRA environment.
However when doing that I get the error => Could not join domain: Error occurred while joining domain. Verify Domain Admin username and password is correct, and the username is the sAMAccountName. Failed to join domain. Error Code: ERROR_BAD_FORMAT. Message:
I'm sure the userids are correct.
I can resolve the domain on my appliances and there isn't a firewall in between.
I've found the same issue here in the community but there wasn't any feedback on how it was solved (Vrealize 7.0 integration with Active directory )
Anybody has some ideas on how to solve it?
Hi People,
I was connecting vCenter and ESXi but every time getting same error.
Anyone please assist.
We currently use identity based rules with the FortiNet product (physical firewall) and want to feed username/IP info from their collector (which works very well) into NSX-Ts identity based fw to be able to use id based rules with VRA.
We are exploring NSX options rather than having to automate rules on the fortiGate FW. Can we feed AD ip/username data into NSX? Is there a way possibly via API to feed NSX this information?
Edit: can someone confirm our suspicion that guess introspection is the only way nst-t can update it's u see up mappings out of the box ? Meaning that there is no active directory log scraping in nsx-t?
Regards.
Does anyone have issues loading autocad in you desktops. We are using horizon 7.6 uem 9.6. Intermittently our users get the following error invalid configuration file path filename\
c:\users\%username%\appdata\roaming\autodesk\autcad2018\R22.0\enu. if we delete the profile it works sometimes. the %username% originally was the username we used to capture the profile setting. when i saw that i went into the flexfile and changed it to %username% hoping it just user the current account name that was logged in but this did not work.
I want to remove the resource objects from the inventory explorer of my adapter which has collection status as RESOURCE_STATUS_NO_DATA_RECEIVING. Since vROPs does not immediately remove them, they are getting accumulated and causing a slowdown of the system.
What I'm thinking of doing is checking the collection status of each resource and if it is RESOURCE_STATUS_NO_DATA_RECEIVING, I'll set the collection state as RESOURCE_STATE_NOT_EXISTING which will be removed by vROPS according to this (VMware Knowledge Base).
But when I'm getting the ResourceConfig using getMonitoringResource(ResourceKey), It is just giving me the collection state of the resource using ResourceConfig.getState() but not the status.
The function to get status as mentioned in documentation (vrealize-operations-manager-SDK-70-programming-guide) does not exist which is ResourceConfig.getStatus().
Is there any way I can get the status of resource object? Or any other way I can tackle the problem I'm facing?
I thought of getting resource status for object type Process using ResourceDto object but I could not create the ResourceDto object for the Process Object type.
I'm using vROps SDK version 7.0
So I am trying to setup a shutdown script (.bat file) for my UPS to automatically shutdown the VMs and ESXI/Vsphere when the battery is low before it completes dies
I have enabled putty with ssh and public/private key for login which works but every time the script runs it prompts to press enter after the login so the script wont run until the press enter is done
Is there something I am missing
The script is essentially this
c:\putty\plink.exe ESXI "/sbin/shutdown.sh && /sbin/poweroff"